HomeSET products have been developed over years with many man years of research and quality testing to ensure that only the very best of products are delivered. HomeSET products use Enocean technology which uses low power transmission communicating between devices thus enabling the concept of self powered devices. Tommaso is a proud partner of the Enocean Alliance (https://www.enocean-alliance.org/membership/our-members/) which has some of the world’s best companies coming together to develop inter operable devices for the automation space. Our products can be combined with a range of Enocean devices that are available across the globe
The Gateway is the brain of the HomeSET solution.It connects to the Wifi network/Internet network of the house and enables cloud based control from the guest's smart device.It wirelessly communicates to each connected sensor,relay or actuator to control the various electric devices.It can be set up for scenarios,schedules and smart scenarios.Smart scenarios are sensor driven commands using the IF THEN logic.All features including installation are customisable by the user.
Identify the circuit breaker of the switch you want connected to the relay. Switch off the breaker to ensure no power is flowing before you open the switchboard. After opening the switchboard, identify the Line wire, generally connected to all the switches. Connect this to the pin marked L on the relay. Identify the neutral wire and connect it to the pin marked N on the relay. The load wire, which is the wire going from the switch to the light should be removed and connected to the pin marked O in the relay. Connect the pin marked S to the load of the switch. Turn on the power and check if the light is working by turning the switch on.
The Occupancy Sensor can be easily mounted on the ceiling to enable occupancy based control of lightning, HVAC and miscellaneous electric loads. The sensor uses radio frequency technology to communicate wirelessly with the controller whenever it detects occupancy in the room. The sensor is completely self-powdered by harvesting ambient solar energy so there are no wires to run or batteries to replace, reducing installation time and eliminating the need for ongoing maintenance.
The Door/Window Sensor can be easily mounted on any standard door or window frame to enable occupancy based control of lighting, HVAC and miscellaneous electric loads. The sensor uses radio frequency technology to communicate wirelessly with the controller whenever it detects that a door or window has been opened or closed. The sensor is completely self-powered by harvesting ambient solar energy so there are no wires to run or batteries to replace, reducing installation time and eliminating the need for ongoing maintenance.
Touch panels come in 4 touch and 8 touch options. Highly sensitive touch Switches replace the existing switches. The touch panel can be mounted on a standard 4 module, 6 module or 8 module metal box. Touch panels are fully wireless and are easily configurable with touch button. These options cater to the requirements for all situations. The touch panels communicate with the controller to turn on / off the electrical devices